CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Help with 3D Two Phase Flow

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 2, 2003, 09:59
Default Help with 3D Two Phase Flow
  #1
M Fortey
Guest
 
Posts: n/a
I am currently working on an aerofoil partially submerged in water with air as the second phase. I have set the fluids to be imiscible with separate velocities. This should create a free surface with a wave over the aerofoil. However it is not solving. I am using Fluent 6, does anyone have any suggestions as to where my model could be going wrong.

Any help would be much appreciated.
  Reply With Quote

Old   October 7, 2003, 08:06
Default Re: Help with 3D Two Phase Flow
  #2
mateus
Guest
 
Posts: n/a
Hi!

I've seen some simmilar simulations using VoF...maybe that's your answer.

Regards

MATEUS
  Reply With Quote

Old   October 29, 2003, 14:29
Default Re: Help with 3D Two Phase Flow
  #3
Allen Badeau
Guest
 
Posts: n/a
Make sure that you are specifying your volume fractions correctly, i.e. vof1 and vof2.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
gas-liquid 2 phase flow in microchannels using VoF LyngHoo FLUENT 1 November 13, 2012 20:01
Two Phase Darcy flow with gravity -> problem Cyp OpenFOAM Programming & Development 0 November 17, 2010 08:58
two phase flow + ice phase and breaking soeren87 OpenFOAM Running, Solving & CFD 0 September 19, 2010 10:20
Validation for laminar Disperse phase flow shashwat Main CFD Forum 0 April 4, 2008 02:20
how 2 freeze 1 phase flow field & start lagrangian KK CFX 5 February 14, 2008 17:48


All times are GMT -4. The time now is 09:21.