CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

DPM Injection

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 4, 2003, 18:25
Default DPM Injection
  #1
cp
Guest
 
Posts: n/a
Hi All,

Does anyone know how to specify the injection frequency in Discrete Phase Model? For example, if my injection frequency is 25 Hz, How and where do I set the conditions corresponding to this 25 Hz?

Thanks in advance,

Chendhil.
  Reply With Quote

Old   October 7, 2003, 13:41
Default Re: DPM Injection
  #2
alex
Guest
 
Posts: n/a
Hi your time step is equal to

t=1/f=1/25=0.04s

Then once you select unsteady particle tracking you set the start time and the stop time injection in the set injection properties panel under point properties

Recall that fluent inject particles at every time step of your unsteady simulation of the continuous flow, therefore, in the iterate panel introduce the time step size equla to 0.04s and the number of time step, which should be equal to the time required for an statistical number of particles to leave the domain.

Regards

Alex Munoz
  Reply With Quote

Old   October 7, 2003, 19:50
Default Re: DPM Injection
  #3
cp
Guest
 
Posts: n/a
Thank you so much Alex,

I got your point. I will do it as you have suggested.

Thanks once again,

Chendhil.
  Reply With Quote

Old   October 7, 2003, 22:07
Default Re: DPM Injection
  #4
alex
Guest
 
Posts: n/a
Hi

Your welcome, if you need something else let me know!!

Regards

Alex Munoz
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
DPM injection model selection dokeun FLUENT 5 September 6, 2010 04:27
Dense DPM Injection Help (basic sedimentation) sgelman FLUENT 0 July 21, 2010 15:19
On DPM injection properties. akr FLUENT 4 October 23, 2006 11:54
DPM, UDF, Injection Type Zhang FLUENT 0 June 8, 2005 16:51
DPM Injection Parameters Hendawi FLUENT 0 June 13, 2002 10:41


All times are GMT -4. The time now is 19:24.