CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Grid Adaptation (http://www.cfd-online.com/Forums/fluent/32318-grid-adaptation.html)

Suresh October 15, 2003 13:18

Grid Adaptation
 
Hi,

I am trying to find my grid independent solution using grid adaptation. I use velocity gradient adaptation and I initially used 30,000 terahedral cells.

I adapted my grid to 70,000 cells. Finally I found my grid independent solution at 100,000 cells.

Since I knew that my solution was grid independent at 100,000 cells i ran a grid refinement from 30,000 to 100,000 cells.

Surprisingly I found my results to be low as compared to the previously adapted 10,000 cells grid( previous grid was adapted in steps 30000 t0 70000, 70000 to 10000).

Am I doing any mistake here? Even the results I want are based on velocity gradients.

I would be happy if you can give me some suggestions on this.



All times are GMT -4. The time now is 16:31.