CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Left Handed faces

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 15, 2003, 19:19
Default Left Handed faces
  #1
ff
Guest
 
Posts: n/a
Hi,

After creating grid interfaces and grid checking in my domain I found left handed faces. Is it possible to correct this problem? Thanks in advice. ff
  Reply With Quote

Old   October 16, 2003, 06:02
Default Re: Left Handed faces
  #2
Erwin
Guest
 
Posts: n/a
Try this: type in the command window:

/grid/modify-zones/repair-face-handedness
  Reply With Quote

Old   October 16, 2003, 06:58
Default Re: Left Handed faces
  #3
ff
Guest
 
Posts: n/a
Thanks Erwin. I already used that function but after as well as before I have left handed faces in my domain (without negative volumes). MY final mesh was build using two separate meshes which are merged with fluent utillity tools. Those separate meshes are valid without left handed faces and without negative volumes. After creating grid interafecs left handed faces apears but as I say without negative voluems. Any tips?

Thanks in advice, ff
  Reply With Quote

Old   October 16, 2003, 12:10
Default Re: Left Handed faces
  #4
Guest
Guest
 
Posts: n/a
type at the FLUENT console:

(rpsetvar 'nonconformal/cell-faces 0)

before creating the grid interface. Make sure that you type the paranthesis as well.

enjoy!
  Reply With Quote

Old   October 17, 2003, 10:34
Default Re: Left Handed faces
  #5
ff
Guest
 
Posts: n/a
Thanks,

I'll try. Where I can find more about rpsetvar functions.

Thanks, ff
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[snappyHexMesh] SnappyHexMesh for internal Flow vishwa OpenFOAM Meshing & Mesh Conversion 24 June 27, 2016 09:54
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere! sc298 OpenFOAM Meshing & Mesh Conversion 2 March 27, 2011 22:11
DecomposePar unequal number of shared faces maka OpenFOAM Pre-Processing 6 August 12, 2010 10:01
[snappyHexMesh] external flow with snappyHexMesh chelvistero OpenFOAM Meshing & Mesh Conversion 11 January 15, 2010 20:43
how to treat left handed faces xiang FLUENT 1 March 10, 2003 08:08


All times are GMT -4. The time now is 06:14.