CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Free Surface Flow for Ship

Register Blogs Community New Posts Updated Threads Search

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 18, 2003, 07:10
Default Free Surface Flow for Ship
  #1
sam
Guest
 
Posts: n/a
Hello users, i wanted to simulate the wave pattern of a wigely hull using Fluent, pls help me how to do that and send some tips / tutorial or the procedure how i can do that using Fluent. Thank's in advance.
  Reply With Quote

Old   October 21, 2003, 03:28
Default Re: Free Surface Flow for Ship
  #2
ROOZBEH
Guest
 
Posts: n/a
Hi; You must use a multiphase model includes a surface tracking algorithm. Only VOF option of Fluent provides this model. For wave propagation capturing, 3D simulation is better. I extremly recommend you that try to use a structure grid. With an unstructured grid I do not have some good results. Version 6 of Fluent is more better than old versions. I recommend you for first experience with VOF, that you model dam break. Some results about, are provided in litrature. regards
  Reply With Quote

Old   October 21, 2003, 03:39
Default Re: Free Surface Flow for Ship
  #3
mateus
Guest
 
Posts: n/a
Hi!

As Roozbeh said...If possible use the newest version of fluent (I've had troubles with previous versions).Go trough tutorial problem and then work your way up...you can find a "dam break problem" in CFD book of Peric...and probabilly an a web page of tu-hamburg (lab for ship technology - or something like that) A structured grid is a must here! Also a 3d problem (I really dont know how could you simplify this to 2D????)

good luck

MATEUS

  Reply With Quote

Old   October 21, 2003, 03:43
Default Re: Free Surface Flow for Ship
  #4
mateus
Guest
 
Posts: n/a
Hi!

Roozbeh i've lost your mail and also forgoten to answer your question...The value for "n" in turbulent viscosity modification was 10 in my case...(it is considered it should be between 6 and 20...). So your value 10^9 (or something) is way of...

MATEUS
  Reply With Quote

Old   October 21, 2003, 03:56
Default Re: Free Surface Flow for Ship
  #5
ROOZBEH
Guest
 
Posts: n/a
Hi Mateus; I found you here!!! Right now, I send a single message here. Please read this message. Thanks ROOZBEH
  Reply With Quote

Old   October 21, 2003, 13:00
Default Re: Free Surface Flow for Ship
  #6
Jon
Guest
 
Posts: n/a
Sam, check out the dam brake simulation on this page: http://www-waterloo.ansys.com/cfx/pr...maxwell496.mpg

More at: http://www-waterloo.ansys.com/cfx/pr...-5/gallery.htm
  Reply With Quote

Old   October 24, 2003, 05:29
Default Re: Free Surface Flow for Ship
  #7
mateus
Guest
 
Posts: n/a
Hi!

I think you can find some usefull information in:

Azuceta R: Computation of turbulent free-surface flows around ships and floating bodies, PhD thesis, Technical University of Hamburg, Hamburg

or:

Azuceta R., Muzaferija S. Peric M.: numerical simulation of flow around blunt bow model. Proc. Workshop on Numerical Simulation of Two Phase Flows, Ship Research Institute, Tokio 2001

Hope it helps,

Best regards

MATEUS
  Reply With Quote

Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Thermocapillary free surface flow zakifoam OpenFOAM Running, Solving & CFD 10 December 12, 2016 11:44
free surface flow past cylinder vineet FLUENT 1 February 21, 2011 23:11
CFX gravity driven free surface flow tutorial mechovator CFX 37 July 27, 2009 10:28
free surface flow in non-inertial reference frame Tiedingg FLOW-3D 1 February 26, 2009 19:51
Multiphase flow. Dispersed and free surface model Luis CFX 8 May 29, 2007 18:13


All times are GMT -4. The time now is 02:36.