CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Turbulent Viscosity Ratio

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 3, 2003, 08:53
Default Turbulent Viscosity Ratio
  #1
deven
Guest
 
Posts: n/a
Hello,

We are trying to simulate a subsonic (Mach no: 0.6) turbulent internal flow in an S shaped diffusing duct. We are specifying the pressure inlet turbulence boundary conditions using turbulence intensity (5%) and hydraulic diameter (0.4 meter). FLUENT calculates turbulent viscosity ratio of around 11000 at the inlet from our turbulence boundary conditions. Is this a reasonable value? We were expecting this ratio in the range of 10 to 100.

Any direct guidance on this OR any sources for finding out more will be helpful.

Thanks, deven
  Reply With Quote

Old   November 3, 2003, 12:18
Default Re: Turbulent Viscosity Ratio
  #2
Davide
Guest
 
Posts: n/a
Yes I agree with you! It's pretty high! For a value of 5% of turbulence ratio, it should be about 50 in my opinion.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Turbulent viscosity ratio Balaji FLUENT 5 May 27, 2014 03:47
hel (turbulent viscosity ratio limited) for supersonic combustion problem omar.2002bh FLUENT 2 September 5, 2012 11:04
setting value of turbulent intensity and turbulent viscosity ratio in wind tunnel nuimlabib Main CFD Forum 0 August 4, 2009 00:05
On limiting to turbulent viscosity ratio! varghese FLUENT 2 November 15, 2003 09:56
Problem of Turbulent Viscosity Ratio Limited David Yang FLUENT 3 June 3, 2002 06:13


All times are GMT -4. The time now is 02:03.