CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

"interior" boundary condition-urgent

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 13, 2003, 23:26
Default "interior" boundary condition-urgent
  #1
Shankar
Guest
 
Posts: n/a
Hi,

I have a circular hole on the surface of a cylinder and when I read the mesh file into FLUENT, it changes the "interior" boundary condition specified by me on the circular hole to "wall" with an error message : 'cannot change "face#" to interior because there is only one adjacent cell thread'. But this circular hole cannot be wall.

Anybody have any idea what is wrong?

Thanks, Shankar.
  Reply With Quote

Old   November 14, 2003, 03:08
Default Re: "interior" boundary condition-urgent
  #2
Shankar
Guest
 
Posts: n/a
Hello,

I have figured out the problem myself, Thanks.
  Reply With Quote

Old   November 14, 2003, 03:13
Default Re: "interior" boundary condition-urgent
  #3
Ashish
Guest
 
Posts: n/a
Hi shankar,

'interior' surface is specified when we have fluid on either side....if i have understood your case correctly, the error message appears bcoz you have fluid (mesh)on only one side of the surface....so, in the mesher just define this as a separate surface. let's say 'hole'...read the mesh into fluent and define whatever bc you have for the hole...

bye, ashish
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
External Radiation Boundary Condition for Grid Interface CFD XUE FLUENT 0 July 9, 2010 03:53
problem with boundary condition??? smn CFX 5 November 24, 2009 07:37
RPM in Wind Turbine Pankaj CFX 9 November 23, 2009 05:05
Urgent: Boundary condition ck1973 FLUENT 1 July 29, 2006 15:36
URGENT!!..Periodic boundary condition.. Amid Naz FLUENT 1 December 9, 2002 23:14


All times are GMT -4. The time now is 04:52.