Is it a bug of Flunet?

December 5, 2003, 02:44

Dear all, I have compiled a UDF for the inlet velocity. After compiling it and setting it as inlet boundary condition, the Fluent can get exact inlet flow waveform I prefer. However, if I want to decrease the inlet velocity to 50% of the previous one and change the corresponding factors in the UDF before compiling and recalculating, The Fluent still get the same flow rate as the previous one. The inlet velocity does not decrease 50% as I expected.

So is it the bug of FLUENT? (I thought my UDF shall not be wrong for I only change the resultant velocity to multiply 0.5)

I do need your help! Thanks a lot!

December 5, 2003, 03:23

hi may,

Try to read again your case after compiling.

good luck.

December 5, 2003, 04:23

Hi, Mr./Ms. Chen,

Thanks for your kindly suggestion! I will try it and let you know the results soon. Best Regards,

December 5, 2003, 07:00

Dear Ms./Mr. Chen, Thanks a lot! The problem is solved.

December 6, 2003, 09:38

hi may,

glad to hear that.

good luck.

December 5, 2003, 02:44	Is it a bug of Flunet?	#1
may Guest Posts: n/a	Dear all, I have compiled a UDF for the inlet velocity. After compiling it and setting it as inlet boundary condition, the Fluent can get exact inlet flow waveform I prefer. However, if I want to decrease the inlet velocity to 50% of the previous one and change the corresponding factors in the UDF before compiling and recalculating, The Fluent still get the same flow rate as the previous one. The inlet velocity does not decrease 50% as I expected. So is it the bug of FLUENT? (I thought my UDF shall not be wrong for I only change the resultant velocity to multiply 0.5) I do need your help! Thanks a lot!

December 5, 2003, 03:23	Re: Is it a bug of Flunet?	#2
ccc Guest Posts: n/a	hi may, Try to read again your case after compiling. good luck.

December 5, 2003, 04:23	Re: Is it a bug of Flunet?	#3
may Guest Posts: n/a	Hi, Mr./Ms. Chen, Thanks for your kindly suggestion! I will try it and let you know the results soon. Best Regards,

December 5, 2003, 07:00	Thanks a lot! It is sloved.	#4
may Guest Posts: n/a	Dear Ms./Mr. Chen, Thanks a lot! The problem is solved.

December 6, 2003, 09:38	Re: Thanks a lot! It is sloved.	#5
ccc Guest Posts: n/a	hi may, glad to hear that. good luck.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Serious bug in LES interface	fs82	OpenFOAM Bugs	21	November 16, 2009 08:15
Please report this bug	egp	OpenFOAM Installation	5	December 8, 2006 12:56
Bug reports	Mattijs Janssens (Mattijs)	OpenFOAM	0	January 10, 2005 10:05
Is there a bug of Flunet?	May	FLUENT	0	December 4, 2003 21:45
Forum y2k Bug	Jonas Larsson	Main CFD Forum	1	January 5, 2000 10:22