CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

unphysical temp fluid/solid region

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 11, 2003, 03:42
Default unphysical temp fluid/solid region
  #1
jonas
Guest
 
Posts: n/a
When modelling heat transfer between a solid and a fluid region unphysical temperatures appeared at the solid/fluid interface. I solved this by using the following (obtained from fluentusers solution 745):

rpsetvar 'temperature/secondary-gradient? #f

My question is what the above command really does?? It's not equivialent to solving the energy equation by first order upwind, or is it? thanks!
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Multi region meshing & recovering the original patch names fluidpath OpenFOAM Native Meshers: snappyHexMesh and Others 4 May 19, 2013 19:13
Using starToFoam clo OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 33 September 26, 2012 04:04
StarToFoam error Kart OpenFOAM Meshing & Mesh Conversion 1 February 4, 2010 04:38
Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 2 July 15, 2005 04:15
Import gmsh msh to Foam adorean Open Source Meshers: Gmsh, Netgen, CGNS, ... 24 April 27, 2005 08:19


All times are GMT -4. The time now is 21:24.