CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Two Phase Problem (http://www.cfd-online.com/Forums/fluent/32706-two-phase-problem.html)

M.Jayaprasad December 12, 2003 06:07

Two Phase Problem
 
Respecred Sir,

I have facing difficult in two phase problem (i.e) solid Medium and Liquid medium.

In my domain ,Giving these above two medium as boundary condiyion with respect to one is velocityinlet (i.e) air and second is mass flow inlet( i.e) solid particles . I tried several times , but during intialisation ,I'm facing difficult Whether I can solve this above problem in Fluent software. So I kindly request to you , please do the needfull for me. Thanking you, Yours faithfully M.jayaprasad

Alamgir December 23, 2003 02:55

Re: Two Phase Problem
 
Hi,

If u r solving Eulerian multiphase flow, u need mention the solid particle as a liquid form with all the solid properties and set as secondary phase and liquid (air or water) should be set as the primary one. For further information plz read chapter 20 in fluent 6.0 manual.

Alamgir


All times are GMT -4. The time now is 23:34.