CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

INTERIOR

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 22, 2003, 18:01
Default INTERIOR
  #1
Mike
Guest
 
Posts: n/a
Please i don't know what is the interior boundary and how i can impose it from GAMBIT.
  Reply With Quote

Old   December 23, 2003, 16:05
Default Re: INTERIOR
  #2
Jun
Guest
 
Posts: n/a
What do you want to do with interior boundary?

From fluent manual: "The internal face boundary conditions are defined on cell faces, which means that they do not have a finite thickness and they provide a means of introducing a step change in flow properties. These boundary conditions are used to implement physical models representing fans, thin porous membranes, and radiators. The ``interior'' type of internal face zone does not require any input from you."

Jun
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Interior B.C. Problem Samaneh Zeighami FLUENT 6 September 8, 2012 05:06
Removing interior cells shd01 OpenFOAM Native Meshers: blockMesh 3 January 16, 2011 11:11
mass flow rate on the Iso-clip surface & interior Sunil Gupta FLUENT 0 April 22, 2008 09:29
fluids cross interior face? jdb FLUENT 6 January 22, 2006 18:22
Boundary conditon about interior zhou FLUENT 0 September 19, 2003 18:00


All times are GMT -4. The time now is 03:36.