CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

udf for applying porous jump

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 23, 2003, 00:29
Default udf for applying porous jump
  #1
santosh
Guest
 
Posts: n/a
hello,

I have a problem in which I want to apply porous jump on a surface, but apply different values of C2 for different portions of the surface. Can anyone tell me how it achieve it through udf??

thanks and regards, santosh
  Reply With Quote

Old   December 26, 2003, 19:08
Default Re: udf for applying porous jump
  #2
Ashu
Guest
 
Posts: n/a
why don't you divide the surface into zones to apply different porous jump values?
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] How can I define different zones in ICEM? llrr ANSYS Meshing & Geometry 13 August 4, 2014 20:04
Porous Jump creation problem mulfal OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 4 December 9, 2013 12:59
Porous jump in urban environment samygero FLUENT 0 February 14, 2011 19:26
UDF: DEFINE_CG_MOTION for vertical jump motion of an electrode! alban Fluent UDF and Scheme Programming 2 June 8, 2010 18:54
Testing the integrity of POROUS media and por jump Azman FLUENT 0 July 31, 2006 11:11


All times are GMT -4. The time now is 22:26.