CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Mesh generation problem (http://www.cfd-online.com/Forums/fluent/32755-mesh-generation-problem.html)

Lam December 23, 2003 14:57

Mesh generation problem
 
I have generated a new mesh on an old Gambit file.

I have deleted all the old data of this old file.

I faced a problem when reading the new mesh in Fluent.

The error message which shown in Fluent are as below:

No faces with given nodes- Thread 2, cell 63336

Error: Build_Grid: gird error.

Clearing partially read grid.

Shell conduction zones,

Done.

For those who know the solution, please share with me.

Many thanks.

Lam

BOB December 24, 2003 04:47

Re: Mesh generation problem
 
This has happened to me before and I found I had to re-mesh the geometry.

Lam December 25, 2003 12:37

Re: Mesh generation problem
 
I have re-meshed the model but the same problem still remains. Anybody can provide further advices?


All times are GMT -4. The time now is 09:50.