Gambit Grid

January 16, 2004, 15:15

Ive made a 2d grid in gambit. There are some zones where the mesh needs to be very fine, and others where it is coarse. Ive used the boundary layer option to coarsen it, but that doesnt always work. Ive also place one edge on top of the other and given them different spacings. When I import the mesh into fluent it creates more zones. Im not sure why. It even defines one of the extra edges as a wall. Is there anything else i need to do for this type of grid? Thanks

January 16, 2004, 16:00

Hello

It seems the use of virtual edge for this work is better, if you don't use it.

Hadi

January 16, 2004, 15:15	Gambit Grid	#1
Richard Guest Posts: n/a	Ive made a 2d grid in gambit. There are some zones where the mesh needs to be very fine, and others where it is coarse. Ive used the boundary layer option to coarsen it, but that doesnt always work. Ive also place one edge on top of the other and given them different spacings. When I import the mesh into fluent it creates more zones. Im not sure why. It even defines one of the extra edges as a wall. Is there anything else i need to do for this type of grid? Thanks

January 16, 2004, 16:00	Re: Gambit Grid	#2
hadi Guest Posts: n/a	Hello It seems the use of virtual edge for this work is better, if you don't use it. Hadi

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to copy grid from GAMBIT	Baheti	FLUENT	3	June 18, 2013 12:50
grid for lance using Gambit	star123	FLUENT	0	March 23, 2006 02:38
Combustion Convergence problems	Art Stretton	Phoenics	5	April 2, 2002 05:59
Dead cells created on edges when a grid file is generated in GAMBIT and imported into FLUENT4	Isaac Manohar Ch.	FLUENT	1	June 2, 2000 04:58
Grid for Fluent v.4 using Gambit?	Ray	Main CFD Forum	3	October 27, 1999 12:35