CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Problem with surface pressure integrals

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 9, 2004, 16:09
Default Problem with surface pressure integrals
  #1
javier
Guest
 
Posts: n/a
Hello: I work with sails, and i use it as parachute. I think in this case all the force over the surface must be from viscous terms ( no too much ciculation arround the sail appear), but when i make a force report the viscous force is very smaller than the pressure force. Does anyone knows why?

Other problem is that the pressure force on the sail and the sail shadow are of the same direction, and i think they must pe opossite.

When this problem appear i put a wall in a down stream inviscid flow, and the Dalambert paradox doesnt appear, There was force!. There are too many things i dont understand. Can anyone help me please?

Thanks
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] surface mesh merging problem everest ANSYS Meshing & Geometry 44 April 14, 2016 07:41
[Gmsh] Error : Self intersecting surface mesh, computing intersections & Error : Impossible velan OpenFOAM Meshing & Mesh Conversion 3 October 22, 2015 12:05
a problem in calculating pressure drop in Fluent? yu chun FLUENT 1 May 18, 2004 04:40
CFX4.3 -build analysis form Chie Min CFX 5 July 13, 2001 00:19
Hydrostatic pressure in 2-phase flow modeling (CFX4.2) HB &DS CFX 0 January 9, 2000 14:19


All times are GMT -4. The time now is 08:50.