CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Creating a Free Surface (http://www.cfd-online.com/Forums/fluent/33107-creating-free-surface.html)

Alex Reid February 24, 2004 10:48

Creating a Free Surface
 
I am doing a dissertation on T-Foils at the moment and using Fluent. I was wondering how a free surface could be created which included the back of the boat and a submerged foil?

Alex Reid

Newcastle University

James Date February 24, 2004 19:40

Re: Creating a Free Surface
 
Hi

An interesting problem. I've had a play around modelling T-Foils using Fluent, but not looking at the free surface as yet.

I've modelled simple free surface problems with CFX but not with Fluent. I would also like to know how to go about setting up this sort of problem in Fluent.

Are you modelling a T-Foil rudder, similar to that used on sailing hydrofoils, like the Hobi Tri-Foiler?

Let me know how you get on.

Regards James


All times are GMT -4. The time now is 18:34.