CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

help on checking source term

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 25, 2004, 19:51
Default help on checking source term
  #1
zwdi
Guest
 
Posts: n/a
Hello everyone,

I tried to add the species source term (g/s) in one fluid zone in Fluent. But I am not sure if the adding of the species source correct or not in Fluent. The result is converged. But I don't know how to check and see if the source works well or not by post processing. Could anybody give me guidelines on this point? Thanks a lot.

Zwdi
  Reply With Quote

Old   February 26, 2004, 20:19
Default Re: help on checking source term
  #2
Ryan, Lee
Guest
 
Posts: n/a
In the case of adding source terms into species transport equation, generally, Unit of source term is kg/(m^3*sec).

Then try to check out two simple cases based on physical phenomenon in your system. One is result without source term. The other is result with source term.

Good luck!
  Reply With Quote

Old   February 27, 2004, 16:46
Default Re: help on checking source term
  #3
zwdi
Guest
 
Posts: n/a
thank you, lee. I will try it and let you know.

Zwdi
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
critical error during installation of openfoam Fabio88 OpenFOAM Installation 21 June 2, 2010 03:01
Problems in compiling paraview in Suse 10.3 platform chiven OpenFOAM Installation 3 December 1, 2009 07:21
DecomposePar links against liblamso0 with OpenMPI jens_klostermann OpenFOAM Bugs 11 June 28, 2007 17:51
Help%7e%7einstall openfoam13 on fc5%7e%7e aderliner OpenFOAM Installation 2 September 11, 2006 07:24
Gerris software installation mer Main CFD Forum 2 November 12, 2005 08:50


All times are GMT -4. The time now is 09:06.