CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Negative angles of incidence

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 4, 2004, 10:56
Default Negative angles of incidence
  #1
Luis
Guest
 
Posts: n/a
Hi everybody. I´m studying an airfoil in order to calculate lift and drag coefficients over a range of angles of incidence. The results are OK for the possitive ones, but I find some problems when calculating drag coefficients for the negative angles of incidence, like -1º and -2º. The airfoil is a supercritical one, and the boundary conditions are pressure far fiel and wall for the airfoil. Mach number is 0.76. The domain (far field) is big enough. Thanks for your help!!!!!!!
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
channelFoam for a 3D pipe AlmostSurelyRob OpenFOAM 3 June 24, 2011 14:06
blockMesh error ... balkrishna OpenFOAM Pre-Processing 0 August 17, 2010 03:39
[blockMesh] BlockMesh FOAM warning gaottino OpenFOAM Meshing & Mesh Conversion 7 July 19, 2010 15:11
Contour plot with negative velocity J CFX 11 November 3, 2008 17:46
[blockMesh] Axisymmetrical mesh Rasmus Gjesing (Gjesing) OpenFOAM Meshing & Mesh Conversion 10 April 2, 2007 15:00


All times are GMT -4. The time now is 08:04.