CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   how to pass bc from one zone to second zone (http://www.cfd-online.com/Forums/fluent/33184-how-pass-bc-one-zone-second-zone.html)

Maria March 8, 2004 06:28

how to pass bc from one zone to second zone
 
Hi

Anyone help me to solve this problem.

I have two volume zones name as A & B.I know bc at A inlet and B outlet. I want to solve A & B zone togather by starting with A ( applying known inlet and assume outlet bc for A).

After computing only A zone i am looking to take average of all of velocity components and looking to apply this as inlet bc for zone B.

Now I would simulate zone B with this calculated velocity components as inlet bc and known outlet bc.

After computing zone B, average of pressure at zone B inlet would be bc for zone A outlet for next calculation of zone A

This iterative process is repeated until pressure on the A outlet and B inlet is unchanged.

Thanks in advance

S.B.SHIN March 15, 2004 01:31

Re: how to pass bc from one zone to second zone
 
Hi. I think that you can approach this problem easily if you used scheme language. try scheme!

Maria March 16, 2004 00:12

Re: how to pass bc from one zone to second zone
 
Dear Sir

I don't know anything about scheme language. I am using Fluent. At outlet of a volume zone surface I have 30 horizontal and 20 vertical lines grid. So every horizontal line has 20 nodes. I am looking to take mean of these 20 nodes at each horizontal line. so I get 30 means.

At inlet surface of second volume zone I also have 30 horizontal and 20 vertical lines. Similarly at every horizontal line I have 20 nodes. At every (20) node of first horizontal line of second volume zone inlet, I want to apply mean value of first horizontal line of outlet of first volume. Similarly at all 30 horizontal lines of second zone inlet I want to apply means of first zone outlet.

May you please tell me that which define macro in Fluent UDF could help me to solve this problem?

Thanks Maria


All times are GMT -4. The time now is 20:36.