CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

how to pass bc from one zone to second zone

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 8, 2004, 06:28
Default how to pass bc from one zone to second zone
  #1
Maria
Guest
 
Posts: n/a
Hi

Anyone help me to solve this problem.

I have two volume zones name as A & B.I know bc at A inlet and B outlet. I want to solve A & B zone togather by starting with A ( applying known inlet and assume outlet bc for A).

After computing only A zone i am looking to take average of all of velocity components and looking to apply this as inlet bc for zone B.

Now I would simulate zone B with this calculated velocity components as inlet bc and known outlet bc.

After computing zone B, average of pressure at zone B inlet would be bc for zone A outlet for next calculation of zone A

This iterative process is repeated until pressure on the A outlet and B inlet is unchanged.

Thanks in advance
  Reply With Quote

Old   March 15, 2004, 01:31
Default Re: how to pass bc from one zone to second zone
  #2
S.B.SHIN
Guest
 
Posts: n/a
Hi. I think that you can approach this problem easily if you used scheme language. try scheme!
  Reply With Quote

Old   March 16, 2004, 00:12
Default Re: how to pass bc from one zone to second zone
  #3
Maria
Guest
 
Posts: n/a
Dear Sir

I don't know anything about scheme language. I am using Fluent. At outlet of a volume zone surface I have 30 horizontal and 20 vertical lines grid. So every horizontal line has 20 nodes. I am looking to take mean of these 20 nodes at each horizontal line. so I get 30 means.

At inlet surface of second volume zone I also have 30 horizontal and 20 vertical lines. Similarly at every horizontal line I have 20 nodes. At every (20) node of first horizontal line of second volume zone inlet, I want to apply mean value of first horizontal line of outlet of first volume. Similarly at all 30 horizontal lines of second zone inlet I want to apply means of first zone outlet.

May you please tell me that which define macro in Fluent UDF could help me to solve this problem?

Thanks Maria
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Commercial meshers] Fluent3DMeshToFoam simvun OpenFOAM Meshing & Mesh Conversion 50 January 19, 2020 16:33
Problem in running ICEM grid in Openfoam Tarak OpenFOAM 6 September 9, 2011 18:51
Problem in IMPORT of ICEM input file in FLUENT csvirume FLUENT 2 September 9, 2009 02:08
Error to re-open fluent case file J.Gimbun FLUENT 0 April 27, 2006 09:42
Sliding mesh error Karl Kevala FLUENT 4 February 21, 2001 16:52


All times are GMT -4. The time now is 17:00.