CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Fluent grid file format

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 18, 2004, 07:11
Default Fluent grid file format
  #1
zxaar
Guest
 
Posts: n/a
Does anybody have any idea about where to get details of fluent 6.x grid file formats. i wish to read fluent file into my application (some code I am writing).
  Reply With Quote

Old   March 18, 2004, 08:09
Default Re: Fluent grid file format
  #2
mateus
Guest
 
Posts: n/a
Hi!

What you should do is: go to "surface-iso surface". Then set surface of constant density - set iso values to desired density for example 500kg/m^3 if you have water air problem. This defines a line of cnstant density (the line of interface). Chose the name for the surface, for example denity500 and click create.

To get the coordinates go to "plot-xy plot". Deselect "position on x axis". set "Y axis function to grid - y coordinate" and "x axis function to grid x coordinate. Select "density500" at surfaces. If you want to get the numerical values (instead of plot) select "write to file"..

Hope this helps...

MATEUS
  Reply With Quote

Old   March 18, 2004, 08:14
Default Re: Fluent grid file format
  #3
mateus
Guest
 
Posts: n/a
Sorry this was the answer to some other question...

mateus
  Reply With Quote

Old   March 19, 2004, 09:56
Default Re: Fluent grid file format
  #4
jx
Guest
 
Posts: n/a
I remember the GAMBIT manual explains the neutral format for mesh and the FLUENT user manual explains the fluent native format.

Just check it out.
  Reply With Quote

Old   March 20, 2004, 06:37
Default Re: Fluent grid file format
  #5
zxaar
Guest
 
Posts: n/a
thanks, i could locate that in fluent manuals, its given where they explain cas-data file formats.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
BlockMesh FOAM warning gaottino OpenFOAM Native Meshers: blockMesh 7 July 19, 2010 14:11
Version 15 on Mac OS X gschaider OpenFOAM Installation 120 December 2, 2009 11:23
Changing the grid on the same set-up Katya FLUENT 12 October 8, 2009 16:31
Compiling gmshFoam with OpenFOAM-1.5 BlGene Open Source Meshers: Gmsh, Netgen, CGNS, ... 10 August 6, 2009 04:26
Importable grid file format for cfx 5.71 Oliver CFX 4 March 30, 2006 11:40


All times are GMT -4. The time now is 17:25.