CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Need to reference

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 22, 2004, 11:06
Default Need to reference
  #1
Mark
Guest
 
Posts: n/a
Hi,

Has anyone here split a geometry model into a number of different models, simulated them separately and used the result from the first simulation as the boundary condition, through profiles, to the next simulation and so on?

I used this method to determine an unknown boundary condition in one of my models and to reduce the complexity of a single model.

I'm writing the report now and I need to reference someone else who has used this method. So if anyone could give me a reference, particular with combustion modelling (but any reference will do), that would be great.

Thanks for your help

Regards,

Mark
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Second Derivative Zero - Boundary Condition fu-ki-pa OpenFOAM 10 May 1, 2014 16:26
Error with Wmake skabilan OpenFOAM Installation 3 July 28, 2009 00:35
OpenFOAM on MinGW crosscompiler hosted on Linux allenzhao OpenFOAM Installation 127 January 30, 2009 20:08
G95 + CGNS Bruno Main CFD Forum 1 January 30, 2007 01:34
Building OpenFoAm on SGI Altix 64bits anne OpenFOAM Installation 8 June 15, 2006 09:27


All times are GMT -4. The time now is 10:32.