CFD Online Logo CFD Online URL
Home > Forums > FLUENT

help on tracer flow

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   March 23, 2004, 00:01
Default help on tracer flow
Posts: n/a
Hello Everyone, Does anybody know how to simulating tracer flow? I mean, I want to activate two-way coupled particle and gas flow. But only set their interaction force to 0, only drag exist between them. Which parameters I should control to achive 0 forces (such as particle density, particle diameter) in this simulation? Thanks you very much for your time. Best regards, Zwdi
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Seeding the Flow - Tracer gases? Carlos FLUENT 2 August 23, 2007 11:15
reversed flow at velocity inlet / mass flow inlet ib FLUENT 1 March 26, 2007 13:11
How to change from mass flow to volume flow rate stanley FLUENT 1 February 2, 2007 07:44
potential flow vs. Euler flow curious ... Main CFD Forum 23 July 21, 2006 07:40
Plug Flow Franck Main CFD Forum 3 September 4, 2003 05:57

All times are GMT -4. The time now is 07:13.