CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Re:reynolds number

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 27, 2004, 04:13
Default Re:reynolds number
  #1
amir
Guest
 
Posts: n/a
Hi To select a solution for modeling of turbulent flows is depended to condition of problems. for example : k_e method has a range to apply and when reynolds shear stresses are more noticable , its realy imprtant to used this method.but this method has not enough efficiency in rotational and unbuonded flows . RSM method is good and accurate method for recognizing properties of average flow and reynolds stress. but it computing cost is hight.(it has seven partial differential equation more). amir.
  Reply With Quote

Old   March 27, 2004, 10:04
Default Re:reynolds number
  #2
David
Guest
 
Posts: n/a
hi,

just as an indication, RSM increases your computing cost by 30 to 50% roughly.

David
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Mesh Refinement Luiz Eduardo Bittencourt Sampaio (Sampaio) OpenFOAM Mesh Utilities 41 January 17, 2013 03:43
DecomposePar unequal number of shared faces maka OpenFOAM Pre-Processing 6 August 12, 2010 09:01
BlockMeshmergePatchPairs hjasak OpenFOAM Native Meshers: blockMesh 11 August 15, 2008 07:36
Unaligned accesses on IA64 andre OpenFOAM 5 June 23, 2008 10:37
Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 2 July 15, 2005 04:15


All times are GMT -4. The time now is 00:11.