CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

one inlet and two outlet

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 28, 2004, 02:45
Default one inlet and two outlet
  #1
Fluenter
Guest
 
Posts: n/a
Hi,all: My calculation is unsteady. In my model, there are one inlet and two outlet. I had known the flow rate curves of inlet and outlets, which are vary with time, so the volume fraction at each outlet is also varied with time. Any pressure conditions are unknown. How to set the outlet boundary conditions? Help me ,please.
  Reply With Quote

Old   March 28, 2004, 17:30
Default Re: one inlet and two outlet
  #2
ap
Guest
 
Posts: n/a
You could try to use Outflow boundary condition.

However, if the volume fraction varies with time, you have to use UDF.

Hi

ap
  Reply With Quote

Old   March 28, 2004, 23:23
Default Re: one inlet and two outlet
  #3
Fluenter
Guest
 
Posts: n/a
Thanks, ap. My volume fraction varies with time. I had write a UDF file, and compile successful. But there isnot a udf option can be chosed in the outflow interface. How to operate the UDF of outflow?
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 02:23.