CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   operating pressure location (http://www.cfd-online.com/Forums/fluent/33449-operating-pressure-location.html)

ROOZBEH April 10, 2004 09:58

operating pressure location
 
Hi;

In what case, the location of reference point in operating pressure panel is important. Is this important in cavitation modeling in which we deal with absolut pressure value?

Thanks.

ROOZBEH

Tania April 10, 2004 13:43

Re: operating pressure location
 
I personally define the reference pressure in a point of the oultet boundary but I guess you can also put it at the inlet, since in the cavitation tunnels, the measure of the reference pressure ( that is used for defining the cavitation number) is either at the inlet or at the outlet.

Hope it helps

tania

ROOZBEH April 11, 2004 23:59

Re: operating pressure location
 
Dear;

I use pressure outlet for outlet B.C.(i.e. its location is fixed) and set my cavitation number with the pressure at outlet, but what's the role of location of reference point in operating pressure pannel?

Thanks ROOZBEH


All times are GMT -4. The time now is 13:46.