CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   .NEU FORMAT PROBLEM!! HELP (http://www.cfd-online.com/Forums/fluent/33538-neu-format-problem-help.html)

javier April 20, 2004 14:45

.NEU FORMAT PROBLEM!! HELP
 
HEllo: Could someone tell me, which are the references (nodes or elemnts) which appear when you select a boundary condition printed in the file?

Ex:

Name_surface 19123 6 3 19843 6 2

Im afraid is the node number, but i dont know what are the other numbers.

Thanks


emre April 24, 2004 10:22

Re: .NEU FORMAT PROBLEM!! HELP
 
Hi,

Neutral file format is a bit complicated. But it is not hard to resolve,

-->the first number (19123) is the number of the element -->the second number (6) is the type of the element, 6 corresponds to tetrahedral elements -->the third number (2) is the number of the face which lies on the boundary

Gambit users guide, chapter C explains the neutral file format. you had better read it deeply. Later on i want to discuss some more issues with you, since once i had trouble with .neu file..

Regards

emre


All times are GMT -4. The time now is 11:05.