CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

UDF HELP!!!!!

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 21, 2004, 15:16
Default UDF HELP!!!!!
  #1
Bob
Guest
 
Posts: n/a
I posted earlier, but the response didn't help. I have looked at the UDF manual from Fluent. I couldn't find the help I needed. What I need help at is how can I create a UDF where I want a mass flow rate at a internal hole bc to become a predetermined value. This mass flow rate is related to the pressure at the pressure outlet, defined by a equation. Since the internal bc has a specific zone ID and the outlet has a different ID. How can I distinguish them in my UDF, since all the UDF's I have seen only pertain to one bc zone ID and the domain. I understand that when you select the UDF in the boundary condition it relates that zone ID to the thread. I have found a similar UDF that was on Fluent's help page, but that was to adjust the Thrust to a predetermind value while changing the Temp. But in my case I am changing the Pressure at one face, while the mass flow rate at the internal hole face must become a predetermined constant. I hope this is understandable. Can someone help.
  Reply With Quote

Old   April 22, 2004, 10:08
Default Re: UDF HELP!!!!!
  #2
Bob
Guest
 
Posts: n/a
I have found the solution without using UDF. Within Fluent6.1 at the text menu interface and within the boundary condition text menu there is target mass flow rate settings. This is new within Fluent6.1. I was able to set the max and min pressures at the outlet and then I went to the bc at the outlet and set the mass flow rate there to achieve the desired mass flow rate at the internal hole.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
UDF parallel error: chip-exec: function not found????? shankara.2 Fluent UDF and Scheme Programming 1 January 16, 2012 23:14
How to add a UDF to a compiled UDF library kim FLUENT 3 October 26, 2011 21:38
Dynamic Mesh UDF Qureshi FLUENT 1 December 2, 2009 01:27
UDF...UDF...UDF...UDF Luc SEMINEL FLUENT 0 November 25, 2002 05:03
UDF, UDF, UDF, UDF Luc SEMINEL Main CFD Forum 0 November 25, 2002 05:01


All times are GMT -4. The time now is 14:57.