CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

problem in 3D mesh gambit

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 22, 2004, 06:31
Default problem in 3D mesh gambit
  #1
yann
Guest
 
Posts: n/a
hi

i am trying to study a flow over a truck, and especially the end part of the truck and how reduce the drag. i am starting with a simple model: cube, then i try to add some kind of vanes system. then i crated a brick around the previous volume. then i substract the brick with the truck and try to mesh the volume, but there is an error during the meshing.

can someone tell me if i am doing it correctly, and how can i mesh.

thank you yann
  Reply With Quote

Old   April 22, 2004, 10:23
Default Re: problem in 3D mesh gambit
  #2
co2
Guest
 
Posts: n/a
your geometry operations are not clearly understandable. please explain well. also what is the gambit error ?
  Reply With Quote

Old   April 22, 2004, 22:49
Default Re: problem in 3D mesh gambit
  #3
yann
Guest
 
Posts: n/a
hey thanks for your answer, well for the geometry, i can send it to you by email cause it is really difficult to explain. for the error in gambit: "Initialization failed; perturb boundary nodes and try again. Initialization failed to mesh 7 nodes. ERROR: TG_mesh_Domain failed with error code 1. ERROR: tetrahedral meshing has failed for volume volume 1."

thank you yann
  Reply With Quote

Old   April 23, 2004, 01:24
Default Re: problem in 3D mesh gambit
  #4
mukkarum
Guest
 
Posts: n/a
Hi

Send me your geometry file (.dbs) via email.

Bye
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[GAMBIT] Problem with mesh in Gambit giuseppemerlini ANSYS Meshing & Geometry 12 November 10, 2014 02:04
Gambit - meshing over airfoil wrapping (?) problem JFDC FLUENT 1 July 11, 2011 05:59
gmshToFoam problem: not the same mesh in Gmsh vs. paraview zhernadi Open Source Meshers: Gmsh, Netgen, CGNS, ... 8 July 7, 2011 02:28
Convergence moving mesh lr103476 OpenFOAM Running, Solving & CFD 30 November 19, 2007 15:09
Problem for making mesh in GAMBIT chlim FLUENT 0 July 8, 2005 18:23


All times are GMT -4. The time now is 15:56.