CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Urgent: Fluid flow along with particles

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 27, 2004, 20:57
Default Urgent: Fluid flow along with particles
  #1
Suresh Balasubramanian
Guest
 
Posts: n/a
Hi, I want to simulate a fluid (liquid) flow with particles in the domain. Which model should I use? Multiphase or discrete phase models. I would appreciate if you can clear my doubts on this.

Thanks, Suresh
  Reply With Quote

Old   April 28, 2004, 04:59
Default Re: Urgent: Fluid flow along with particles
  #2
Tom
Guest
 
Posts: n/a
It depends on your problem and how many particles are in the flow? Describe your problem a bit more.
  Reply With Quote

Old   April 30, 2004, 15:25
Default Re: Urgent: Fluid flow along with particles
  #3
Suresh Balasubramanian
Guest
 
Posts: n/a
I wanted to do a simulation on a gravity driven flow of a single phase fluid without heat or mass tansfer.

I just want to know if it can be done. If so, how to do it? Also I want simulate a particle of 20 microns that flows along with the fluid. Even though the fluid is higly viscous 0.035 kg/m-sec, the particle and fluid do not form a slurry. Hope this answers your question.
  Reply With Quote

Old   May 4, 2004, 06:47
Default Re: Urgent: Fluid flow along with particles
  #4
Tom
Guest
 
Posts: n/a
Yes your problem can be modelled in Fluent.

It sounds like you should go for the Discrete Phase option.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
flow over a cylinder urgent! kevin FLUENT 8 August 11, 2015 14:00
trying to simulate two-phase jet flow with particles in surface injection ajkratos FLUENT 5 March 3, 2015 22:33
Urgent: Looping over all particles in unsteady flow orland Fluent UDF and Scheme Programming 2 May 23, 2011 08:33
Flux Limiter Scheme for compressible fluid flow...Need Urgent Help arijith Main CFD Forum 0 April 29, 2011 08:20
How to apply negtive pressure to outlet bioman66 CFX 5 June 3, 2006 02:40


All times are GMT -4. The time now is 04:23.