CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

DPM_evaporation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 12, 2004, 08:00
Default DPM_evaporation
  #1
MOONA
Guest
 
Posts: n/a
Hi folks,using pressure swirl atomizer in research system(spray dryer), but I have not evaporation in droplets. Also replace this atomizer with air blast atomizer,but in this model have not evaporation too .All using equation is right(inlet air temperature is 154 and water temperature falling from atomizer is 18 degree centigrade).What is problem in my system?

Thanks in advance

Thanks.
  Reply With Quote

Old   June 4, 2004, 15:43
Default Re: DPM_evaporation
  #2
Diego
Guest
 
Posts: n/a
Do you have the customs lwas activated?(in the injection panel). I the custom lwas you have to select inert heating, vaporization and boiling... i think, Best Regards, Diego
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 07:10.