|
[Sponsors] |
May 17, 2004, 08:55 |
compressible flow question
|
#1 |
Guest
Posts: n/a
|
I have question of compressible flow.
I have closed tube where left and right and upper boundary conditions is of wall type and then since the problem is axisymmetric we have axis boundary condition in the bottom. Now I have discontinuity at about half of the length and on the left side of discontinuity we have pressure of 1 bar and right side of the discontinutiy we have pressure of 2 bar. My question is how can set two different initial condition on the left and right side of discontinuity. Pratap |
|
May 17, 2004, 14:34 |
Re: compressible flow question
|
#2 |
Guest
Posts: n/a
|
Use "patching", look for more help in the UG.
George |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
High speed compressible flow through pipe | Munni | Main CFD Forum | 6 | December 7, 2015 12:33 |
3-D Compressible Flow Boundary Conditions | Tyler | FLUENT | 4 | February 5, 2009 20:58 |
Question on Unsteady Flow | Ben | CFX | 5 | January 17, 2008 18:04 |
compressible flow in CFX! | Ihsan | CFX | 9 | January 15, 2008 19:50 |
Compressible flow - 2D NACA0012 Aerofoil Sim. | MSc Student | Siemens | 3 | August 26, 2006 02:32 |