CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   high mach number (http://www.cfd-online.com/Forums/fluent/33786-high-mach-number.html)

Arthur Gamara May 22, 2004 11:50

high mach number
 
Dear cfd guys and girls, i need to set my Fluent 5.3 for simulate high Mach number, so that i can see shockwave, can you people teach me how to set it??

krishna May 24, 2004 00:40

Re: high mach number
 
Dear Arthur,

I think it will be easy if r able to convert the Mach Number in terms of Velocity in m/s so that you can specify the velocity itself, I am not so familiar with 5.3 version, this is one of the option.

krishna.

Arthur Gamara May 24, 2004 10:36

Re: high mach number
 
Thank you Khrisna.

I already tried your suggestion, but thre is a problem, when it iterating, the result become divergent, it indicates there are shockwave. Is it true that Fluent can't simulate shockwave???

STK May 24, 2004 16:57

Re: high mach number
 
HI! DO NOT SAY THAT AGAIN !!!!!!!! firstly to see shocks, study the flow around a simple curved object, or the flow in a converging nozzle. better do the first one. Far away from the foil apply FAR-FIELD BOUNDARY CONDITIONS with 101325 pressure, Mach=1.8 Set OPERATING CONDITIONS TO 0 from 101325 and run inviscid model. For the airfoil use no slip conditions (WALL).you will see the shocks. I am writing papers with Fluent on Hypersonic flow if you want anything contact good luck!

Arthur Gamara May 24, 2004 23:09

Re: high mach number
 
SORRY.... STK! I really don't mean it. anyway what's your email, i'd like to contact you bout supersonic flow (mach number=2.3)

where i can find FAR-FIELD BOUNDARY CONDITIONS in Fluent???

Thank you very much!!!!!

STK May 25, 2004 04:38

Re: high mach number
 
IT IS MY PLEASURE HELPING YOU! LOOk THERE IS A PROBLEM because YOU USE 5.3 AND I USE VERSION 6.1.18! I DON'T KNOW WHERE YOU CAN FIND FARFIELD. LOOK AT THE MANUAL. I BELIEVE THAT CERTAINLY BE SOMETHING THERE!My MAIL IS:aerodynamifun@hotmail.com. regards

Arthur Gamara May 25, 2004 08:37

Re: high mach number
 
oh... the version huh..!! is there otherway to see it?


All times are GMT -4. The time now is 09:00.