CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Hexa vs. Tetra (http://www.cfd-online.com/Forums/fluent/33817-hexa-vs-tetra.html)

Jim May 26, 2004 10:05

Hexa vs. Tetra
 
Dear Fluent users, It is well know that cfd accuracy can be improved if the mesh is aligned to the flow direction.Therefore, Hexahedral meshes gained pouplation over the tetrahedral ones to the exetnt that many users take it as a fact disregard the flow case. What I concluded from modeling free shear layer is different. In zones where high ciculation exists, tetrahedral grid gave better results compared to Hexaherdal. I would like some one who has expeience in FLUENT basic discretization to highlight on this and give some useful explanation. Thanks in advance. Jim

zachi May 27, 2004 08:37

Re: Hexa vs. Tetra
 
Hi Jim, that seems very interessting for my work and i would like to know in which specific case (2-dim; 3-dim; v=?m/s;...) you made these observations! Which wall treatment methode did you use and whats about you y+ values?

Regards

zachi


All times are GMT -4. The time now is 07:52.