CFD Online URL
[Sponsors]
Home > Forums > FLUENT

import *.cas file to Gambit error

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 27, 2004, 18:24
Default import *.cas file to Gambit error
  #1
zwdi
Guest
 
Posts: n/a
Dear everyone,

I imported *.cas file to Gambit successfully before. Today I want to import the new *.cas file to Gambit(Unfortunately I deleted the old *.cas file which can be imported to Gambit successfully). But I failed. The error says : Error: bad syntax. Usage: dimension: [-d2 :-d3:-surface] read_format: [-tAnsys : -tCFX :....................: -tTECPLOT] zone: [-zGROUP : -zID : -zPRESSURE : -zTEMPERATURE : -zNONE] default is -zGROUP write_format: [-oFIDAP7 : -oRAMPANT]

Error: the fidap neutral file header (record 1) is non-standard. Error: Error encountered while reading the header information. Gambit is unable to import utility fe2ram -mle-006 -d3 -tRAMPANT -oFIDAP7

I didn't change anything. The only difference is that the fluent version changed from 6.1.18 to 6.1.22.

Could anybody give me any help? I would be very appreciated for it. Thanks.

Best,

Zwdi
  Reply With Quote

Old   May 27, 2004, 18:28
Default Re: import *.cas file to Gambit error
  #2
zwdi
Guest
 
Posts: n/a
Could anybody explain what that error means or what can cause that error? Thanks a lot

Best, Zwdi
  Reply With Quote

Old   May 28, 2004, 14:19
Default Re: import *.cas file to Gambit error
  #3
zxaar
Guest
 
Posts: n/a
how about changing the gambit version too with fluent version, that is can't u have the latest gambit from fluent web site

  Reply With Quote

Old   May 28, 2004, 17:10
Default Re: import *.cas file to Gambit error
  #4
zwdi
Guest
 
Posts: n/a
thanks for your response, zxaar.

Do you think the error is caused by software version updating?

Best,

Zwdi
  Reply With Quote

Old   May 29, 2004, 04:57
Default Re: import *.cas file to Gambit error
  #5
zxaar
Guest
 
Posts: n/a
actually i thought if fluent people have done some changes in fluent case format (may be a little), they might have fixed the problem in gambit too, so that it can be imported easily., its just a thought, but u can check it, by downloading the newest version of gambit from fluentusers.com

  Reply With Quote

Old   May 29, 2004, 13:05
Default Re: import *.cas file to Gambit error
  #6
zwdi
Guest
 
Posts: n/a
Thank you very much, zxaar.

Zwdi
  Reply With Quote

Old   May 29, 2004, 15:07
Default Re: import *.cas file to Gambit error
  #7
zxaar
Guest
 
Posts: n/a
if u try let us know whter it works, will be a help
  Reply With Quote

Old   May 31, 2004, 15:34
Default Re: import *.cas file to Gambit error
  #8
zwdi
Guest
 
Posts: n/a
hi Zxaar,

I had a final try. It works now. Thanks

Best,

Zwdi
  Reply With Quote

Old   June 1, 2004, 04:48
Default Re: import *.cas file to Gambit error
  #9
zxaar
Guest
 
Posts: n/a
i thought so.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
GroovyBC the dynamic cousin of funkySetFields that lives on the suburb of the mesh gschaider OpenFOAM 300 October 29, 2014 20:00
CGNS lib and Fortran compiler manaliac Main CFD Forum 2 November 29, 2010 07:25
groovyBC sega OpenFOAM Running, Solving & CFD 12 February 17, 2010 10:30
user subroutine error CFDUSER CFX 2 December 9, 2006 07:31
error while compiling the USER Sub routine CFD user CFX 3 November 25, 2002 16:16


All times are GMT -4. The time now is 22:27.