CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Multiphase: ņan or cannot? (http://www.cfd-online.com/Forums/fluent/34021-multiphase-nan-cannot.html)

Aleex June 22, 2004 01:41

Multiphase: ņan or cannot?
 
Hi! I want to simulate compressibility multiphase flow. Can FLUENT do this? Or I need other program?

ap June 22, 2004 07:34

Re: Multiphase: ņan or cannot?
 
FLUENT can't simulate compressible multiphase flows.

Hi :)

ap

Aleex June 22, 2004 15:08

Re: Multiphase: ņan or cannot?
 
Thank... :( And what program I have use?

ap June 28, 2004 07:57

Re: Multiphase: ņan or cannot?
 
I never used a compressible multiphase model. What do you need to simulate?

Hi :)

ap

Aleex June 28, 2004 14:24

Re: Multiphase: ņan or cannot?
 
For example, filtration gas, oil and water in porous media. I have a large change of gas density, mass flow between phases and small change of oil density then gas leaving oil...

coma June 30, 2004 09:42

Re: Multiphase: ņan or cannot?
 
well in my view discrete phase model may be used to simulate some multiphase flow when the second phase volume is little than 10%


All times are GMT -4. The time now is 22:35.