CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Multiphase: ņan or cannot?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 22, 2004, 01:41
Default Multiphase: ņan or cannot?
  #1
Aleex
Guest
 
Posts: n/a
Hi! I want to simulate compressibility multiphase flow. Can FLUENT do this? Or I need other program?
  Reply With Quote

Old   June 22, 2004, 07:34
Default Re: Multiphase: ņan or cannot?
  #2
ap
Guest
 
Posts: n/a
FLUENT can't simulate compressible multiphase flows.

Hi

ap
  Reply With Quote

Old   June 22, 2004, 15:08
Default Re: Multiphase: ņan or cannot?
  #3
Aleex
Guest
 
Posts: n/a
Thank... And what program I have use?
  Reply With Quote

Old   June 28, 2004, 07:57
Default Re: Multiphase: ņan or cannot?
  #4
ap
Guest
 
Posts: n/a
I never used a compressible multiphase model. What do you need to simulate?

Hi

ap
  Reply With Quote

Old   June 28, 2004, 14:24
Default Re: Multiphase: ņan or cannot?
  #5
Aleex
Guest
 
Posts: n/a
For example, filtration gas, oil and water in porous media. I have a large change of gas density, mass flow between phases and small change of oil density then gas leaving oil...
  Reply With Quote

Old   June 30, 2004, 09:42
Default Re: Multiphase: ņan or cannot?
  #6
coma
Guest
 
Posts: n/a
well in my view discrete phase model may be used to simulate some multiphase flow when the second phase volume is little than 10%
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
volume fraction = nan Virtual-iCFD OpenFOAM Running, Solving & CFD 8 June 12, 2015 18:15
error in grmsch? Adam Beamish FLOW-3D 2 September 2, 2011 04:05
Cells with t below lower limit Purushothama CD-adapco 2 May 31, 2010 21:58
Unfamiliar Error coops OpenFOAM Running, Solving & CFD 7 October 3, 2006 13:54
Could anybody help me see this error and give help liugx212 OpenFOAM Running, Solving & CFD 3 January 4, 2006 19:07


All times are GMT -4. The time now is 07:43.