CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   How to set Low-Re k-e model (http://www.cfd-online.com/Forums/fluent/34032-how-set-low-re-k-e-model.html)

Frank June 23, 2004 18:57

How to set Low-Re k-e model
 
Hi

I use "define/model/viscous/turbulence-expert/low-re-ke" to add low-re k-e model into the GUI, but my FLUENT shows this function is forbidden. Is there any function can change this setting?

Thanks for the help.

sarah_ron June 24, 2004 01:40

Re: How to set Low-Re k-e model
 
You'd better type it, sometimes copy and paste will result in the above information.

Frank June 24, 2004 20:03

Re: How to set Low-Re k-e model
 
I read the case&data first. Then I can use the command to add low-re-ke into the GUI.

Thanks.


All times are GMT -4. The time now is 22:34.