CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Moving mesh, change the B.C

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 28, 2004, 21:21
Default Moving mesh, change the B.C
  #1
Gilsub
Guest
 
Posts: n/a
Hi, everyone I am trying to simulate the valve using Moving Deforming Mesh(MDM). Fluent supports MDM, In-Cylinder model. It is possible to chage or delete the Boundary Condition(B.C) using In-Cylinder Model at arbitrary time. But I am not use In-Cylinder model. How can I change or delete the B.C at arbitary time? If I change the B.C using UDF, How can I specify the UDF? Regards.

GilSub Song
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
SnappyHexMesh for internal Flow vishwa OpenFOAM Native Meshers: snappyHexMesh and Others 23 August 6, 2014 03:50
3D Hybrid Mesh Errors DarrenC ANSYS Meshing & Geometry 11 August 5, 2013 06:42
Dynamic Mesh moving interface help akash.iitb FLUENT 0 August 23, 2010 23:53
Moving Mesh Run problem - Scientific Linux G. SE CD-adapco 2 May 7, 2008 07:15
CavitatingFoam with a moving mesh mass conservation error idosil OpenFOAM Running, Solving & CFD 3 November 27, 2007 18:27


All times are GMT -4. The time now is 15:01.