CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   FLUENT (https://www.cfd-online.com/Forums/fluent/)
-   -   emergency:reference values in Fluent (https://www.cfd-online.com/Forums/fluent/34064-emergency-reference-values-fluent.html)

avesta June 29, 2004 01:48

emergency:reference values in Fluent
 
Dear all All books on heat transfer tell me the Nusselt number of the fully-developed laminar flow in a pipes is a constant;if the wall temperature is constant,the Nu=3.66;if the heat flux is constant,the Nu will be 4.36. but when i simulate this ,Nu in constant wall temperature will be 2.59 and it do not limit to 3.66 in fully developed laminar flow. i do not know what reference values put in meno of reference valuen in report>reference values...

what reference values do you recommand?

i want to simulate laminar flow in a pipe as non-dimentional by Fluent.

inflow: U=1,T=1 WALL: U=0, T=1

Density=1, Cp=1, Thermal Conductivity(K)=1/(Re.Pr), Viscosity=1/Re

guide me

best regard

Avesta



All times are GMT -4. The time now is 14:43.