CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

emergency:reference values in Fluent

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 29, 2004, 01:48
Default emergency:reference values in Fluent
  #1
avesta
Guest
 
Posts: n/a
Dear all All books on heat transfer tell me the Nusselt number of the fully-developed laminar flow in a pipes is a constant;if the wall temperature is constant,the Nu=3.66;if the heat flux is constant,the Nu will be 4.36. but when i simulate this ,Nu in constant wall temperature will be 2.59 and it do not limit to 3.66 in fully developed laminar flow. i do not know what reference values put in meno of reference valuen in report>reference values...

what reference values do you recommand?

i want to simulate laminar flow in a pipe as non-dimentional by Fluent.

inflow: U=1,T=1 WALL: U=0, T=1

Density=1, Cp=1, Thermal Conductivity(K)=1/(Re.Pr), Viscosity=1/Re

guide me

best regard

Avesta

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fluent - license problem. Marcin FLUENT 3 April 13, 2018 17:33
Why is my fluent simulation giving Cp values above 1??? wils Main CFD Forum 3 March 26, 2010 10:12
solving ocean wave with Fluent or CFX? gholamghar Main CFD Forum 1 March 21, 2009 13:49
shear rate values with fluent IƱigo Main CFD Forum 0 October 17, 2005 07:25
Getting values from fluent solver Moshiur R. Chowdhury FLUENT 2 November 27, 2002 14:41


All times are GMT -4. The time now is 21:34.