Low-Re turbulence models in Fluent 6.0
I know that in earlier versions of Fluent you could have the low-Re turbulence models show up in the GUI. Is this possible in Fluent 6.0? How is it done? And how do you activate the v2f model? Thanks for any help.
Iason Hatzitheodorou |
Re: Low-Re turbulence models in Fluent 6.0
use the command to add low-re k-epsilon models into the GUI: "define/model/viscous/turbulence-expert/low-re-ke" enter "y" Actually there are 6 versions of low-re models, use "define/model/viscous/turbulence-expert/low-re-ke-index" to select models. May u should select k-e first from the GUI, then use the commands to change it to low-re-ke models.
I am also try to activate the v2f model, but failed. |
Re: Low-Re turbulence models in Fluent 6.0
Thanks for the help, but I tried and it does not have the turbulence-expert option. It seems FLUENT 6.0 does not support them any more. I will contact my license holder to get support from FLUENT with regards to the v2f model (I think you have to pay royalty). Thanks again.
Jason |
Re: Low-Re turbulence models in Fluent 6.0
I am also wondering how to activate the V2F model in Fluent. Can anybody help? Thanks very much!
|
All times are GMT -4. The time now is 18:52. |