CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

error: invalid topology

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 19, 2004, 12:15
Default error: invalid topology
  #1
julie
Guest
 
Posts: n/a
Hi everyone,

I was attempting to mesh a penstock composed by several volumes but I got this message while trying to mesh an edge:

error:face face.41 is missing edge edge.62 in lower topology list

error:coedge for face face.41 and edge edge.62 is missing (or corrupt)

error: coedge for edge edge.62 and face face.41 is missing (or corrupt)

error:meshing edge edge.62 aborted because it has invalid topology

What should I do?

Thanks for advice!
  Reply With Quote

Old   July 20, 2004, 03:38
Default Re: error: invalid topology
  #2
laika
Guest
 
Posts: n/a
Hi Julie,

Gambit error messages are not very instructive. Can you tell us what kind of geometry you are trying to mesh, how you created/imported that geometry, and what you did befor you got these error messages. Maybe you can send us your journal-file?

Laika, still orbiting
  Reply With Quote

Old   July 20, 2004, 16:46
Default Re: error: invalid topology
  #3
julie
Guest
 
Posts: n/a
Hi Laika (again!),

I don't know why it did not work yesterday, but I have tried again this morning, have change a little the way I built the volume and after several tests I had another error message.

I have tried to solve this new problem (problem of memory) and I do not if it is related or no but now it works. Weird!

Anyway, thanks again for your help.

regards,

julie
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Topology change and zone modification WiWo OpenFOAM 0 July 7, 2010 04:35
[ICEM] Building topology command script files Anorky ANSYS Meshing & Geometry 8 January 11, 2010 08:25
how to rebuild the geometry topology starting from the mesh. joegi.geo ANSYS Meshing & Geometry 1 December 2, 2009 00:17
ICEM topology Igor-a CFX 0 July 24, 2008 07:05
Topology SAM FLUENT 2 October 13, 2004 00:01


All times are GMT -4. The time now is 09:28.