CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Heat transfer in tube bank.

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 6, 2004, 10:05
Default Heat transfer in tube bank.
  #1
Paul
Guest
 
Posts: n/a
Im having problems with excess heat generation on tubes. I need to find the heat flux on the outside of a tube which is subject to an oncoming flow of cooler temperatures. However the tubes shadow is creating energy. This is causing the energy balance in the system to be over exaggerated. Any ideas would be greatly appreciated.

Paul
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Water subcooled boiling Attesz CFX 7 January 5, 2013 04:32
Distribution of surface heat transfer coefficient along the axial direcion of a tube andred FLUENT 0 November 16, 2010 22:13
Convective / Conductive Heat Transfer in Hypersonic flows enigma Main CFD Forum 2 November 1, 2009 23:53
Convective Heat Transfer - Heat Exchanger Mark CFX 6 November 15, 2004 16:55
Heat transfer tube Takeshi CD-adapco 4 July 15, 2003 10:44


All times are GMT -4. The time now is 06:20.