Temperature is abnormally high!
I try to simulate the process of combustion between two infinite parallel planes. I can't explain why the maximum temperature is abnormally high.
|
Re: Temperature is abnormally high!
I have considered the relationship between the thermal capacity and the temperature.
|
Re: Temperature is abnormally high!
What kind of combustion model do you use? I find the same hapenning with a one-step reaction with finite-rate kinetics. But that might be the limitation of doing finite rate kinetic modeling.
|
Re: Temperature is abnormally high!
I have tried:
Segregated Solver\Unsteady 1-st-Order Implicit Viscous Modle \ K-e Species Model\Specise Transport Volumetric Recation\Laminar Finite-Rate And I have considered the relationship between the thermal capacity and the temperature. What the other attention I should have to pay to? |
Re: Temperature is abnormally high!
Should I have to consideration Radiation Model? I"m going to try to add this model!
|
Re: Temperature is abnormally high!
Hi, I want to know how did you simulated infinite plate,you have used laminar flame model,is your flow is in laminar region,did you get any help by including radiation.
|
All times are GMT -4. The time now is 08:27. |