CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

divergence in AMG solver

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 31, 2004, 10:07
Default divergence in AMG solver
  #1
benjamin
Guest
 
Posts: n/a
Hi,

I am trying to model a free surface with the VOF scheme and cannot make the solver converge when using a structured grid. I changed the interpolation schemes, the under-relaxation factors, the cycle type for the x-momentum and turbulent viscosity in the multigrid control panel and the mesh density but I still get this problem whereas when I use an unstructured mesh, it converges correctly. Anyone knows what to do to correct this (except not using a structured grid!)?

Regards

Ben
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Error: Divergence detected in AMG solver: species-0 -> Increasing relaxation sweeps ksiegs2 FLUENT 2 June 18, 2012 11:26
Divergence detected in AMG & FMG solver..... devesh.baghel FLUENT 1 January 17, 2011 01:58
Error: Divergence detected in AMG solver siri FLUENT 3 October 21, 2010 14:34
Divergence detected AMG solver error Rub Nawaz Khalid FLUENT 2 August 14, 2010 11:01
divergence in AMG solver Aly FLUENT 1 November 11, 2004 13:00


All times are GMT -4. The time now is 07:52.