CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Can the changed mesh file be used?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 6, 2004, 11:03
Default Can the changed mesh file be used?
  #1
Kim
Guest
 
Posts: n/a
Hello!

I have worked with a mesh file in FLUENT and saved it in case file. But, I have to change the geometry a little. My question is whether I can use the changed mesh file in the same case file. I mean, whether I can work with the new mesh file without repeating all processes in FLUENT except the changed part.

I can not express my question well. When you can not understand it, I will try to describe in detail.

Thanks in advance!
  Reply With Quote

Old   September 6, 2004, 12:04
Default Re: Can the changed mesh file be used?
  #2
Titiksh Patel
Guest
 
Posts: n/a
Hi,

It can't be done according to my knowledge. Zones/B.C.'s can be changed but changing geometry would be difficult.

Hope it helps.

Titiksh
  Reply With Quote

Old   September 7, 2004, 01:37
Default Re: Can the changed mesh file be used?
  #3
SAM
Guest
 
Posts: n/a
it can be
  Reply With Quote

Old   September 7, 2004, 07:08
Default Re: Can the changed mesh file be used?
  #4
Titiksh Patel
Guest
 
Posts: n/a
How..???

Kindly inorm me..!!

Thanx in advance..!!
  Reply With Quote

Old   September 7, 2004, 09:44
Default Re: Can the changed mesh file be used?
  #5
Volker Pawlik
Guest
 
Posts: n/a
You can save a boundary condition file under /file/write-bc and read it in again by /file/read-bc.

You have to keep the same boundary-zone titles. All boundary conditions (for the existing zones), material def., model def. etc are kept.

Monitor definition might fail, since the selected zones depend on their position in the zone list (this might change due to new boundary zones).

Solution parameters seem not to be maintained. Scaling has to be done manually.

Volker
  Reply With Quote

Old   September 8, 2004, 10:49
Default Wow! Super!!
  #6
Kim
Guest
 
Posts: n/a
It works really amazingly! Thank you very much for the information!!
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
wmake compiling new solver mksca OpenFOAM Programming & Development 14 June 22, 2018 07:29
2.0.x on Mac OSX niklas OpenFOAM Installation 74 March 28, 2012 17:46
1.7.x Environment Variables on Linux 10.04 rasma OpenFOAM Installation 9 July 30, 2010 05:43
Problem with rhoSimpleFoam matteo_gautero OpenFOAM Running, Solving & CFD 0 February 28, 2008 07:51
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55


All times are GMT -4. The time now is 17:36.