CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   2-phase surface flow (http://www.cfd-online.com/Forums/fluent/34646-2-phase-surface-flow.html)

stk September 19, 2004 09:41

2-phase surface flow
 
Hi! Does anybody knows any other models to handle surface flows except VOF? I see in Eulerian and Langrange model, that i have to put a characteristic diameter in the secondary flow panel, which means that i have to describe particle flow, which i don't want. The reason for asking is that Fluent reports that Dynamic mesh and VOF are not compatible!(i use dynamic). Any ideas are welcome! thanks!


Frank Meißen September 20, 2004 03:11

Re: 2-phase surface flow
 
"The reason for asking is that Fluent reports that Dynamic mesh and VOF are not compatible!"

Where does Fluent report this? In our cases it is compatible.

Frank


stk September 20, 2004 10:24

Re: 2-phase surface flow
 
Thank you Frank !!I wanted this confirmation!!!! But take a look in Fluent 6.1 Documentation:FLUENT Model Compatibility, and you will see what i mean! i hope that the results of dynamic vof are certainly reliable!

Frank Meißen September 21, 2004 02:19

Re: 2-phase surface flow
 
Hello stk,

this is a mistake of Fluent, which was also confirmed by FLUENT support.

Frank


All times are GMT -4. The time now is 06:07.