CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Boundary layers problem (http://www.cfd-online.com/Forums/fluent/34660-boundary-layers-problem.html)

carlos ortiz September 20, 2004 20:55

Boundary layers problem
 
Hello there,

I've been trying to define boundary layers on different solid faces that bathe in a fluid contained in a cylindrical chanel.

I'm trying to define then boundary layers that go into the fluid volume but I always get the arrow and the boundary layer itself pointing into the solid volumes. If I want to change the direction of the arrow by SHIFT+CENTER click the boundary layer disappears or I get a boundary layer with no rows at all.

I have no trouble to create BLs on the chanel walls pointing in the right direction, but I'm unable to do the samething on the solid volumes that are contained inside the cilinder.

Thanks in advance.

Carlos Ortiz



All times are GMT -4. The time now is 01:39.