CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

who has ERCOFTAC Best Practice Guidelines ?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 24, 2004, 01:45
Default who has ERCOFTAC Best Practice Guidelines ?
  #1
sarah_ron
Guest
 
Posts: n/a
The ERCOFTAC Best Practice Guidelines for Industrial Computational Fluid Dynamics

The Best Practice Guidelines (BPG) were commissioned by ERCOFTAC following an extensive consultation with European industry which revealed an urgent demand for such a document. The first edition was completed in January 2000 and constitutes generic advice on how to carry out quality CFD calculations. The BPG therefore address mesh design; construction of numerical boundary conditions where problem data is uncertain; mesh and model sensitivity checks; distinction between numerical and turbulence model inadequacy; preliminary information regarding the limitations of turbulence models etc. The aim is to encourage a common best practice by virtue of which separate analyses of the same problem, using the same model physics, should produce consistent results. Input and advice was sought from a wide cross-section of CFD specialists, eminent academics, end-users and, (particularly important) the leading commercial code vendors established in Europe. Thus, the final document can be considered to represent the consensus view of the European CFD community.

  Reply With Quote

Old   September 27, 2004, 07:17
Default Re: who has ERCOFTAC Best Practice Guidelines ?
  #2
James Date
Guest
 
Posts: n/a
Hi

I have a copy. You can buy it from:

http://imhefwww.epfl.ch/lmf/ERCOFTAC/SIGs/BPG.html

or download a copy which is aimed at marine applications from:

https://pronet.wsatkins.co.uk/marnet...nes/guide.html

Regards James
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
ERCOFTAC Best Practice Guidelines CFD XUE Main CFD Forum 1 April 5, 2011 19:15
Best Practice Guidelines for SolidWorks? MaxCFM STAR-CCM+ 1 May 12, 2009 13:40
Modelling Airfoil Flow Best Practice Ian Main CFD Forum 0 October 3, 2007 07:19
ERCOFTAC best practice guidelines carno Main CFD Forum 3 January 4, 2006 01:25
best practice guidelines novice Main CFD Forum 4 August 12, 2004 11:52


All times are GMT -4. The time now is 17:01.